AS-Schneider - Isolate Valves

Schneider DirectMount Systems

Allgemeine Merkmale

Isolate Valves (Block Valves)

Bore Size 3/8" (9.5 mm)
– Stem Seal: O-Ring
Soft Seat: Cone Design

Features

Rising Plug Valve Design
Replaceable Valve Seat – ETFE, optional POM or PEEK
Stem Seal – O-Ring in FKM (optional RGD resistant) or FEPM
Non-rotating Needle
External Stem Thread – Packing below stem threads. Stem threads are protected from process media (non-wetted).
6.5 turns to fully open or close the valve
Heavy Duty Stem Threads
Blow-out Proof Stem
Back Seat – Metal to metal secondary stem seal
Lock Pin – Eliminates unauthorized removal of the bonnet
Color Coded Dust Cap for operating thread protection.
Minimized gap between stem and stem nut for additional operating thread protection.
Valve Seat in ETFE 2.000 psi (138 bar) rated – POM/PEEK 6,092 psi (420 bar) rated
All non-wetted parts are 316 Stainless Steel

Isolate Valves (Block Valves)

Bore Size 3/8" (9.5 mm)
– Stem Seal: PTFE Packing
Soft Seat: Cone Design

Features

Wetted components listed in bold.

Produkte

Unternehmen

Aktuelles

Informationen