Manifold combination for direct mounting, with test connection - Armaturenfabrik Franz Schneider GmbH + Co. KG

Instrumentation Division | Diesel Engine Valves Division | Automotive Division | Download | Search

Instrumentation
Division

Hook ups Order instructions 2 valve manifolds 3 valve manifolds 5 valve manifolds Integral manifolds Manifolds combinations Monoflanges Multi-way cocks Shut-off valves Mounting accessories Air headers Gauge valves Gauge cocks Gauge protectors Gauge snubbers Pressure instrument accessories

Further
Product Lines

Diesel Engine Valves Division Automotive Division

Instrumentation Products - Manifold combinations

3.24

Catalogue page: PDF 3.24
Hook ups: F02

Manifolds-combination PN 420 DN 8
for direct mounting according to DIN EN 61518
with test connection M 20 x 1,5

1 manifold
2 purge valve

MOUNTING ACCESSORIES see section 8

Material	Inlet d	Outlet²⁾		L [mm]	Part no.
Material	Inlet d	Manifold	Purge valve	L [mm]	Part no.
steel st. st.	butt weld end for tube O. D. 14 x 2,5 mm	DIN EN 61518 Type A	tube fitting O. D. 14 mm, line S	117	N541.87.135.51 N541.87.235.51
steel st. st.	butt weld end for tube O. D. 14 x 2,5 mm		tube fitting O. D. 12 mm, line S	117	N541.87.135.52 N541.87.235.52
steel st. st.	socket weld end I. D. 14,25 for tube O. D. 14 mm		tube fitting O. D. 14 mm, line S	105	N541.87.139.51 N541.87.239.51

Components	Steel type		Stainless steel type
Components	Manifold	Purge valve	Manifold	Purge valve
Body¹⁾	1.0460	1.5415	1.4571
Bonnet	1.0501	1.7709	1.4571
Valve seat	1.4021		1.4571
Valve stem	1.4104	1.4021	1.4571
Needle tip	1.4122 ³⁾		1.4571
Packing	PTFE	graphite	PTFE	graphite
Union nut	steel	-	1.4571	-
Gland nut	-	2.0550	-	1.4301
Test connection	steel	-	1.4571	-

Body: die-pressed part
Surfache: steel phosphatized
Manifold: internal stem thread
Purge valves: external stem thread
Replaceable valve seat
Stem with cold rolled surface, back seat and non-rotating needle tip
Special types are available
Accessories: 1 socket wrench

Available with inspection certificate 3.1 acc. to EN 10 204; body made of 1.5415 with inspection certificate 3.2 acc. to EN 10 204
Dimensions acc. to DIN EN 61518 - see order instruction B4
1.4122 quenched and tempered