English
Contact
Description
Metal Seated Ball Valves Standard
  • Metal Seated Ball Valves Standard
  • Metal Seated Ball Valves Standard
  • Metal Seated Ball Valves Standard

Metal Seated Ball Valves

Type KM

AS-Schneider KM Series Ball Valves are available with a lot of options. The ball valves are designed for extreme operating conditions with a Pressure Rating of Class 2,500 and temperatures up to 842°F (450°C). The ball valves are Fire Safe tested acc. to ISO 10497 and API 607 and meet the requirements of TA-Luft. The below mentioned valve (see drawings) is the standard type. If you need the dimensions for your individual type please contact the factory.

Bore Size: 0.39" (10 mm)

Connections, materials and further options are available, please see below Ordering Information or more detailed under:

General InformationExample for a typical product acc. to the below mentioned Ordering Information:

Part No.: KM9-A6PLN6-S

KM Metal Seated Ball Valve - Bore Size 0.39" (10 mm)
9 Seal Material of Packing and Bonnet Seal / Ball Seat:
Graphite / Stainless Steel, Tungsten Carbite Coated
-
A6 Inlet Butt Weld End1/2" Pipe
P Outlet Wall ThicknessSchedule 80
LN Outlet Thread Type: NPT Female
6 Outlet Thread Size: 3/4
-
S Material: 1.4401 / 1.4404 / 316 / 316L
KM Series Metal Seated Ball Valves
Metal Seated Ball Valves Drawing (arrangement)
The dimensions shown in this catalogue apply to standard types. If you need the dimensions for your individual type or should you still not find your options at all please contact the factory.
Ordering Information
BI
Metal Seated Ball Valves Drawing (arrangement)
MS
Further InformationAS-Schneider KM Series Ball Valves are available with a lot of options. The ball valves are designed for extreme operating conditions with a Pressure Rating of Class 2,500 and temperatures up to 450°C (842°F). The ball valves are Fire Safe tested acc. to ISO 10497 and API 607 and meet the requirements of TA-Luft. The robust design of the valves gives long service life and optimum operating comfort. The AS-Schneider KM Series Ball Valves, as standard, are rated to 420 bar (6,092 psi). AS-Schneider also provides the valves for sour gas service (acc. to NACE MR0175/MR0103 and ISO 15156).
Copyright © 2015 Armaturenfabrik Franz Schneider GmbH + Co. KG. All rights reserved.