English
ContactFeedback
Description
2 Valve Manifolds Standard 1
  • 2 Valve Manifolds Standard 1
  • 2 Valve Manifolds Standard 2
  • 2 Valve Manifolds Standard 3
  • 2 Valve Manifolds Standard 4
  • 2 Valve Manifolds Standard 5

2 Valve Manifolds

W2L Type

Manifolds with L-Shaped Bonnet Orientation

AS-Schneider Direct Mount 2 Valve Manifolds (Wafer Style) are designed for direct mounting to Pressure Transmitters with standard flange connection in accordance with DIN EN 61518 / IEC 61518. The standard vent connection is 1/4 NPT female. Pipe plugs are not installed as standard.

A diverse range of options and the relevant accessories are available, please see below Mounting Bracket Kits and Accessories.

Connections, materials, valve head unit designs and further options are available, please see below Ordering Information or more detailed under:

General InformationExample for a typical product acc. to the below mentioned Ordering Information:

Part No.: W2LASA-N4TD

W Wafer Style Manifold
2 Quantity Bonnets: 2
L Manifold Specifics: Standard: L-Shaped Bonnet Orientation
A Inlet: Female
S Material: 1.4401 / 1.4404 / 316 / 316L
A

Bonnet: PTFE

-
N4 Inlet - Thread Size: 1/2 NPT
TD Outlet - Transmitter Interface: DIN EN 61518-A
2 Valve Manifolds – L-Shaped Bonnet Orientation
W2L Type
2 Valve Manifolds Drawing (arrangement) 1
The dimensions shown in this catalogue apply to standard types. If you need the dimensions for your individual type or should you still not find your options at all please contact the factory.
Ordering Information
BI
2 Valve Manifolds Drawing (dimension) 2
MS
Further Information

AS-Schneider Direct Mount 2 Valve Manifolds (Wafer Style) are designed for direct mounting to Pressure Transmitters with standard flange connection in accordance with DIN EN 61518 / IEC 61518. The innovative design of the valve head units gives long service life and a smooth, low-torque operation. The AS-Schneider 2 Valve Manifolds, as standard, are rated to 420 bar (6,092 psi). AS-Schneider also provides the manifolds for sour gas service (acc. to NACE MR0175/MR0103 and ISO 15156), degreased and lubricated for oxygen service as well as manifolds for fugitive emission applications.

Copyright © 2015 Armaturenfabrik Franz Schneider GmbH + Co. KG. All rights reserved.