English
Contact
Description
5 Valve Manifolds Standard
  • 5 Valve Manifolds Standard
  • 5 Valve Manifolds Standard 1
  • 5 Valve Manifolds Standard 2
  • 5 Valve Manifolds Standard 3
  • 5 Valve Manifolds Standard 4

5 Valve Manifolds

R5 Type

AS-Schneider Remote Mounted 3 Valve Manifolds are designed for remote installation from Differential Pressure Transmitters. The standard vent connection is 1/4 NPT female. Pipe plugs are not installed as standard. Two locations of Vent Ports are available (see below).A diverse range of options and the relevant accessories are available, please see below Mounting Bracket Kits and Accessories.

Connections, materials, valve head unit designs and further options are available, please see below Ordering Information or more detailed under:

General InformationExample for a typical product acc. to the below mentioned Ordering Information:

Part No.: R5AASA-N4N4

R Remote Mounted Manifold
5 Quantity Bonnets: 5
A Vent Connection: 1/4 NPT Female
A Inlet x Outlet: Female Connections
S Material: 1.4401 / 1.4404 / 316 / 316L
A Bonnet: PTFE
-
N4 Inlet Thread Size: 1/2 NPT
N4 Outlet Thread Size: 1/2 NPT
Remote Mounted 5 Valve Manifolds
R5AA Type
5 Valve Manifolds Drawing (arrangement) 1
Remote Mounted 5 Valve Manifolds with Vent Ports on Process Side
Type R5GA
5 Valve Manifolds Drawing (arrangement) 1
The dimensions shown in this catalogue apply to standard types. If you need the dimensions for your individual type or should you still not find your options at all please contact the factory.
Ordering Information
BI
5 Valve Manifolds Drawing (arrangement) 1
MS
Mounting Bracket Kits and Accessories
Further InformationAS-Schneider Remote Mounted 5 Valve Manifolds are designed for remote installation from Differential Pressure Transmitters. The innovative design of the valve head units gives long service life and a smooth, low-torque operation. The AS-Schneider 5 Valve Manifolds, as standard, are rated to 420 bar (6,092 psi), but can be rated at 689 bar (10,000 psi). AS-Schneider also provides the manifolds for sour gas service (acc. to NACE MR0175/MR0103 and ISO 15156), degreased and lubricated for oxygen service as well as manifolds for fugitive emission applications.
Copyright © 2015 Armaturenfabrik Franz Schneider GmbH + Co. KG. All rights reserved.