Description

Mounting Bracket Kit

AKM-D Type and AKM-C Type

The Bracket fits to AS-Schneider E Series Manifolds Type D, W and 5 as well as to our F Series Manifolds Type S541/N541. The difference between AKM-D and AKM-C is just the thread type of the manifold/bracket bolts The standard bracket Type D requires M10 bolts and for the Coplanar^TM Style Manifolds 3/8-16 UNC bolts are required. The bracket is designed for panel, wall and 2" pipe mounting and gives full clearance for ease of handle operation.

The Mounting Bracket contains:

1 Mounting Bracket
2 'U' Bolts
4 Washers – 8.4
4 Hexagon Nuts M8
2 Washers – 10.5
2 Socket Head Cap Screws M10x14 → AKM-D Type respectively
2 Socket Head Cap Screws 3/8-16 UNC x 5/8" → AKM-C Type

Example for a typical product acc. to the below mentioned Ordering Information:

Part No.: AKM-DPS

AKM	Mounting Bracket Kit
-
D	Suitable for: E Series Manifolds Type D, W and 5 as well as our F Series Manifolds Type S541/N541
P	Mounting Method: 2" Pipe Mounting
S	Material: Stainless Steel, 300 Series

Mounting Bracket Kits for Vertical Impulse Piping Installation

AKM-D Type AKM-C Type

Mounting Bracket Kit Drawing (arrangement) 1

Ordering Information

Further InformationThe Bracket fits to AS-Schneider E Series Manifolds Type D, W and 5 as well as to our F Series Manifolds Type S541/N541. The Bracket is designed for panel, wall and 2" pipe mounting and gives full clearance for ease of handle operation.