English
ContactFeedback
Description
Gauge Cocks Standard 1
  • Gauge Cocks Standard 1
  • Gauge Cocks Standard 2
  • Gauge Cocks Standard 3
  • Gauge Cocks Standard 4
  • Gauge Cocks Standard 5

Gauge Cocks

Male Thread x Adjusting Nut

AS-Schneider Gauge Cocks are basically designed, manufactured and tested according to DIN 16261, DIN 16262 and DIN 16263. According to above standards the cocks are applicable for a max. allowable (Working) Pressure (PS) of 6 – 16 bar (87 - 232 psi) and a max. allowable Temperature (TS) of 50°C (122°F) for liquids, gas or vapors. Originally the AS-Schneider Gauge Cocks were designed for a max. allowable (Working) Pressure (PS) of 25 bar (363 psi) for the G 1/2 models. We kept this pressure class for this kind of gauge cocks, see below Ordering Information.

Operating Positions are marked on top of the plug (see also further comments under General Information).

The relevant accessories are available; please see below Mounting Bracket Kits and Accessories.

Connections, materials and further options are available, please see below Ordering Information or more detailed under:

General InformationWebshop
Gauge Cocks - Male Thread x Adjusting Nut

Without Test Connection         With Test Connection               With Test Flange                 With Test Flange
                                                          M 20 x 1.5                               Ø 40 x 5                            60 x 25 x 10

Gauge Cocks Drawing (arrangement) 1
Ordering Information
Gauge Cocks with Male x Female (Adjusting Nut) ConnectionBI
Inlet Outlet Material PN L H Hex Test Connection References Part Number
G 1/4 Male G 1/4 Adjusting Nut Brass     6 55 30 17   DIN 16262 Type B S003.42.000
G 1/2 Male        G 1/2 Adjusting Nut 25 80 57 27 DIN 16262 Type A N003.30.000
Brass AP*    S003.30.000.32
 1.4571 83 DIN 16262 Type A  S003.30.200
Brass 80 M 20 x 1,5 c/w Protective Cap DIN 16263 Type A N003.31.000
Brass AP* S003.31.000.32
1.4571 83 DIN 16263 Type A S003.31.200
Brass 80 Test Flange
60 x 25 x 10
  N003.36.000
Stainless Steel 83   S003.36.200 
Brass   80 Test Flange
Ø 40 x 5
 
  N003.38.000 
M 20 x 1,5 Male M 20 x 1,5 Adjusting Nut   N003.30.050 
83 M 20 x 1,5 c/w Protective Cap   N003.31.050 
1.4571    S003.31.250 

 
* Brass (AP) = Body, Adjusting Nut and Protective Cap in Brass.

MS
Further InformationAS-Schneider Gauge Cocks are basically designed, manufactured and tested according to DIN 16261, DIN 16262 and DIN 16263. According to these standards the cocks are applicable for a max. allowable (Working) Pressure (PS) of 6 – 16 bar (87 - 232 psi) and a max. allowable Temperature (TS) of 50°C (122°F) for liquids, gas or vapors.
Copyright © 2015 Armaturenfabrik Franz Schneider GmbH + Co. KG. All rights reserved.