English
ContactFeedback
Description
5 Valve Manifolds Standard
  • 5 Valve Manifolds Standard
  • 5 Valve Manifolds Standard
  • 5 Valve Manifolds Standard
  • 5 Valve Manifolds Standard
  • 5 Valve Manifolds Standard
  • 5 Valve Manifolds Standard
  • 5 Valve Manifolds Standard
  • 5 Valve Manifolds Standard

5 Valve Manifolds

H5S/H5L Type

AS-Schneider Soft Seated Direct Mount 5 Valve Manifolds H5S/H5L Type are flanged on the process side to an Orifice Meter-Stabilized connector-(if necessary Spacer / 2 Valve Manifold)-Assembly and on the outlet to a Differential Pressure Transmitter resp. an Adapter-Transmitter-Assembly. The standard vent connection is 1/4 NPT female and is supplied with a fitted Bug Plug. The test ports 1/4 NPT female are plugged by default. Accessory Kits incl. washers are required for manifold to transmitter mounting, because the manifolds are provided with slotted bolt holes.

The H5S Type is used for Vertical Installations.

The H5L Type is applicable for Horizontal Installations.

Bore Size:
-
Isolate Valves - 3/8" (9.5 mm)
- Equalize and Vent Valves - 0.138" (3.5 mm)

The process to instrument connection is fully roddable due to the Cone Design Valve Seat of the Isolate Valves.

A diverse range of options and the relevant accessories are available; please see below Mounting Bracket Kits and Accessories.

Connections, materials, valve head unit designs and further options are available, please see below Ordering Information or more detailed under:

General InformationExample for a typical product acc. to the below mentioned Ordering Information:

Part No.: H5S-SKB

H H-Style Manifold - Flange x Flange
5 Quantity Bonnets: 5
S Manifold Design: Straight Type, Bore Size 3/8" (9.5 mm)
-
S Material: 1.4401 / 1.4404 / 316 / 316L
K Stem Seal / Packing: O-Ring FKM
B Seat Material: POM x POM
5 Valve Manifolds - Flange x Flange

H5S Type
Straight Type 5 Valve Manifold

5 Valve Manifolds Drawing (arrangement)
The dimensions shown in this catalogue apply to standard types. If you need the dimensions for your individual type or should you still not find your options at all please contact the factory.
5 Valve Manifolds - Flange x Flange
H5L Type
Angle Type
5 Valve Manifolds Drawing (arrangement)
The dimensions shown in this catalogue apply to standard types. If you need the dimensions for your individual type or should you still not find your options at all please contact the factory.
Ordering Information
BI
5 Valve Manifolds Drawing (arrangement)
MS
Further InformationAS-Schneider Soft Seated Direct Mount 5 Valve Manifolds H5S/H5L Type are flanged on the process side to an Orifice Meter-Stabilized connector-(if necessary Spacer / 2 Valve Manifold)-Assembly and on the outlet to a Differential Pressure Transmitter resp. an Adapter-Transmitter-Assembly. The standard vent connection is 1/4 NPT female and is supplied with a fitted Bug Plug. The test ports 1/4 NPT female are plugged by default. The innovative design of the valve head units gives long service life and a smooth, low-torque operation. The AS-Schneider Manifolds, as standard, are rated to 420 bar (6,092 psi). AS-Schneider also provides the manifolds for sour gas service (acc. to NACE MR0175/MR0103 and ISO 15156) and degreased and lubricated for oxygen service.
Copyright © 2015 Armaturenfabrik Franz Schneider GmbH + Co. KG. All rights reserved.