English
ContactFeedback
Description
Equalizer Manifolds Standard 1
  • Equalizer Manifolds Standard 1
  • Equalizer Manifolds Standard 2
  • Equalizer Manifolds Standard 3
  • Equalizer Manifolds Standard 4

Equalizer Manifolds

EM3 Type

AS-Schneider Soft Seated Direct Mount Equalizer Manifolds are designed for direct mounting to Differential Pressure Transmitters. The inlet connections (process connection), as standard, are 1/4 or 1/2 NPT female threaded and the vent connection is 1/4 NPT female. The test/calibration ports 1/4 NPT female are plugged.

Bore Size:
- Process to Instrument Connection – Bore Size 3/8" (9.5 mm) - Roddable
- Equalize and Vent Valves – Bore Size 0.138" (3.5 mm)

A diverse range of options and the relevant accessories are available, please see below Mounting Bracket Kits and Accessories.

Connections, materials, valve head unit designs and further options are available, please see below Ordering Information or more detailed under:

General InformationExample for a typical product acc. to the below mentioned Ordering Information:

Part No.: EM3-SKDN2

EM Equalizer Manifold
3 Quantity Bonnets: 3
-
S Material: 1.4401 / 1.4404 / 316 / 316L
K Stem Seal / Packing: O-Ring FKM
D Seat Material: POM
N2  Thread Size: 1/4 NPT
Equalizer Manifolds
Equalizer Manifolds Drawing (arrangement) 1
The dimensions shown in this catalogue apply to standard types. If you need the dimensions for your individual type or should you still not find your options at all please contact the factory.MS
Ordering Information
BI
Equalizer Manifolds Drawing (dimension) 1
Mounting Bracket Kits and Accessories
Further InformationAS-Schneider Soft Seated Direct Mount Equalizer Manifolds are designed for direct mounting to Differential Pressure Transmitters. The inlet connections (process connection), as standard, are 1/4 or 1/2 NPT female threaded and the vent connection is 1/4 NPT female. The test/calibration ports 1/4 NPT female are plugged. The AS-Schneider Manifolds, as standard, are rated to 420 bar (6,092 psi). AS-Schneider also provides the manifolds for sour gas service (acc. to NACE MR0175/MR0103 and ISO 15156) and degreased and lubricated for oxygen service.
Copyright © 2015 Armaturenfabrik Franz Schneider GmbH + Co. KG. All rights reserved.