Armaturenfabrik Franz Schneider
GmbH + Co. KGBahnhofplatz 12 · 74226 Nordheim · Germany
Tel. +49 7133 101-0 · Fax +49 7133 101-180
E-mail: contact@as-schneider.com · Internet: www.as-schneider.com
Go Back
Description
Mounting Bracket Kit Standard 1
  • Mounting Bracket Kit Standard 1
  • Mounting Bracket Kit Standard 2
  • Mounting Bracket Kit Standard 3
  • Mounting Bracket Kit Standard 4
  • Mounting Bracket Kit Standard 5

Mounting Bracket Kit

AKM-D Type and AKM-C Type

The Bracket fits to AS-Schneider E Series Manifolds Type D, W and 5 as well as to our F Series Manifolds Type S541/N541. The difference between AKM-D and AKM-C is just the thread type of the manifold/bracket bolts The standard bracket Type D requires M10 bolts and for the CoplanarTM Style Manifolds 3/8-16 UNC bolts are required. The bracket is designed for panel, wall and 2" pipe mounting and gives full clearance for ease of handle operation.

The Mounting Bracket contains:

 

  • 1 Mounting Bracket
  • 2 'U' Bolts
  • 4 Washers – 8.4
  • 4 Hexagon Nuts M8
  • 2 Washers – 10.5
  • 2 Socket Head Cap Screws M10x14 → AKM-D Type respectively
  • 2 Socket Head Cap Screws 3/8-16 UNC x 5/8" → AKM-C Type
Example for a typical product acc. to the below mentioned Ordering Information:

Part No.: AKM-DPS

AKM Mounting Bracket Kit
-
D Suitable for: E Series Manifolds Type D, W and 5 as well as our
F Series Manifolds Type S541/N541
P Mounting Method: 2" Pipe Mounting
S Material: Stainless Steel, 300 Series
Mounting Bracket Kits for Vertical Impulse Piping Installation

AKM-D Type                                  AKM-C Type

Mounting Bracket Kit Drawing (arrangement) 1
Ordering Information
BI
Mounting Bracket Kit Drawing (arrangement) 1
Further InformationThe Bracket fits to AS-Schneider E Series Manifolds Type D, W and 5 as well as to our F Series Manifolds Type S541/N541. The Bracket is designed for panel, wall and 2" pipe mounting and gives full clearance for ease of handle operation.