Armaturenfabrik Franz Schneider
GmbH + Co. KGBahnhofplatz 12 · 74226 Nordheim · Germany
Tel. +49 7133 101-0 · Fax +49 7133 101-180
E-mail: contact@as-schneider.com · Internet: www.as-schneider.com
Go Back
Description
Sealing Washers Standard 1
  • Sealing Washers Standard 1
  • Sealing Washers Standard 2

Sealing Washers

EN 837-1

The below mentioned Sealing Washers are used for parallel male threads in accordance with EN 837-1. Grooved gaskets and corrugated gaskets are special types. Materials are not defined in EN 837-1. It is the responsibility of the user to ensure compatibility between the selected gasket ring material and the process requirements, such as pressure, temperature, and chemical compatibility.

Webshop
Sealing Washers according to EN 837-1
Sealing Washers Drawing (arrangement) 1
Ordering Information
For Thread Dimensions in mm Material Remarks Part Number
D d b
G 1/4 9.5 5.2 1.5 Copper S006.03.003.50
1.4571 S006.03.007.50
PTFE S006.03.008.50
G 3/8 13 5.7 2 Copper S006.03.053
G 1/2 and M 20 x 1.5 17.5 6.2 Aluminium S006.03.002
Copper S006.03.003
Soft Iron S006.03.004
Vulcanized Fiber S006.03.005
1.4571 S006.03.007
1.4571 Grooved Gasket S006.03.007.05
PTFE S006.03.008
1.4404 Corrugated Gasket S006.03.013.02
Further InformationThe above mentioned Sealing Washers are used for parallel male threads in accordance with EN 837-1.