With your consent, we analyze the use of our website with tracking technologies and cookies in order to optimize the website and improve it continuously. The consent is voluntary and can be revoked at any time. Further information can be found in our privacy policy.
English
Contact
Description
Condensate Pots Standard
  • Condensate Pots Standard
  • Condensate Pots Standard

Condensate Pots

for Larger Volume Displacements

Condensate Pots (also called Seal Pots) are used in the measurement of steam or other vapors for two reasons: One reason is that a level of condensed water is accumulated inside of the pot and maintains a fluid volume for displacement equal to or greater than the volume displacement of the transmitter (protecting the transmitter from heat).

The second reason for maintaining a liquid inside of the pot is to prevent flashing of the liquid in the impulse line if a sudden temperature change of the steam is made. A dam inside of the pot prevents this flashing effect.

Pots with more outlet ports for applications where foreign material should be trapped and drained preventing damage of the manifolds and transmitters are also available.

For more details please contact the factory. For details see also DIN 19211.
Condensate Pots
Condensate Pots Drawing (arrangement)
Ordering Information
Weld End Connections Part Number
Material
1.5415
PN Volume
Inlet Outlet 250 cm3 700 cm3
Pipe Butt Weld End Ø 21.3 x 6.3 Pipe Butt Weld End Ø 21.3 x 6.3 250 S007.51.653.05
Pipe Butt Weld End Ø 33.7 x 4.5 Pipe Butt Weld End Ø 24 x 7.1 250 S007.51.653.06
G 1/2 Male DIN 19207 Type R G 1/2 Male DIN 19207 Type V 160 S007.51.653.04
Further InformationCondensate Pots (also called Seal Pots) are used in the measurement of steam or other vapors for two reasons: One reason is that a level of condensed water is accumulated inside of the pot and maintains a fluid volume for displacement equal to or greater than the volume displacement of the transmitter (protecting the transmitter from heat).

The second reason for maintaining a liquid inside of the pot is to prevent flashing of the liquid in the impulse line if a sudden temperature change of the steam is made. A dam inside of the pot prevents this flashing effect.
Copyright © 2015 Armaturenfabrik Franz Schneider GmbH + Co. KG. All rights reserved.