With your consent, we analyze the use of our website with tracking technologies and cookies in order to optimize the website and improve it continuously. The consent is voluntary and can be revoked at any time. Further information can be found in our privacy policy.
English
Contact
Soft Seated Valves and Manifolds
General Features
Soft Seat - Cone Design
Soft Seat - Cup Design
Soft Tip Design
  • Bore Size 1/4" (6.35 mm) and 3/8" (9.5 mm)
  • Seat Material: ETFE, POM, PEEK
  • Straight-Through Design => Fully Roddable for easy cleaning if used in dirty Service
  • Bi-directional Flow
  • Field Replaceable
  • Bore Size 0.138" (3.5 mm)
  • Seat Material: PCTFE, POM, PEEK
  • Field Replaceable
  • Small in size but big on pressure load
  • Bore Size 0.197" (5 mm)
  • Tip Material: PCTFE, POM
  • Same Valve Body as for all E Series Metal Seated Valves and Manifolds
Soft Seated Hand Valves
Bore Size 0.197" (5.0 mm)
– Needle Seal: PTFE Packing or O-Ring

Features
  • Integral Valve Seat
  • Needle Seal
    – PTFE Packing or
    – O-Rings in FKM (optional RGD resistant) or EPDM
  • Soft Tip PCTFE or POM
  • Non-rotating Needle
  • External Stem Thread – Packing below stem threads.
    Stem Threads are protected from process media (non-wetted).
  • Stem with cold rolled Threads
  • Blow-out proof Needle
  • Back Seat – Metal to metal secondary needle seal
  • Lock Pin – Eliminates unauthorized removal of the bonnet
  • Color Coded Dust Cap for operating thread protection
  • Standard 6,092 psi (420 bar) rated
  • Anti-Tamper Valve Head Options available
  • All non-wetted parts in 316 stainless steel
Copyright © 2015 Armaturenfabrik Franz Schneider GmbH + Co. KG. All rights reserved.