With your consent, we analyze the use of our website with tracking technologies and cookies in order to optimize the website and improve it continuously. The consent is voluntary and can be revoked at any time. Further information can be found in our privacy policy.
English
Contact
E Series Valves and Manifolds
General Features
Standard Valve Head Units
T Handle
Operating options are Anti-Tamper Features or a Stainless Steel Handwheel

Valve Stem
Stem with cold rolled threads for high strength and smooth operation.

Needle Seal
Standard: PTFE or Graphite Packung
Options: O-Ring or Bellows Sealed

Needle
Non-rotating Needle for smooth Operation and minimum wear of sealing elements.

Back Seat
Metal to Metal secondary needle seal and therefore the needle is anti-blowout / non-removable – For your safety.

Needle Tip
Choices of Needle Tip Materials such as Stellite, and Soft Tips like PCTFE and POM.

Valve Seat
Metal seated (integral type) and Soft seated.
Color Coded Dust Cap
For operating thread protection:
Isolate - Blue
Vent/Test - Red
Equalize - Green

Color Coded Options
Following options are also color coded below dust cap:
Oxygen Service - White
Graphite Packing - Black
FKM O-ring Stem Seal with PCTFE Soft Tip - Orange
TA-Luft Option - Magenta

Lock Pin
Eliminates unauthorized removal of the bonnet assembly.

Bonnet
Metal to Metal Seal to Valve Body.

Traceability of Materials
All AS-Schneider E Series Valves and Manifolds have material traceability.
A unique code is stamped on all valve bodies linking them with their material and chemical analysis certificates.
Flow Data
Needle Valves Standard Head Unit - Bore Size 5 mm
Copyright © 2015 Armaturenfabrik Franz Schneider GmbH + Co. KG. All rights reserved.