With your consent, we analyze the use of our website with tracking technologies and cookies in order to optimize the website and improve it continuously. The consent is voluntary and can be revoked at any time. Further information can be found in our privacy policy.
English
Contact
F Series Manifolds and Multi-Way Cocks
General Features
Body Material Options
Material
Group
AS-Material
Designation
Material
No.
Short Name Equivalent
UNS-No.
Material
Grade acc.
to ASTM
Manifolds Manifold-
Combinations
Multi-Way
Cocks
Copper Alloys Brass*1 CW614N CuZn39Pb3 S
Copper Alloys Brass*1 CW617N CuZn40Pb2 S
Heat Resistant
Unalloyed Steel
Carbon Steel 1.0460 P250GH S S
Austenitic
Stainless Steel
Stainless Steel 1.4571 X6CrNiMoTi17-12-2 S 31635 316Ti S S S
Austenitic
Stainless Steel
Stainless Steel 1.4404 X2CrNiMo17-12-2 S 31603 316L A
Austenitic
Stainless Steel
6Mo 1.4547 X1CrNiMoCuN20-18-7 S 31254 A
Austenitic-Ferritic
Stainless Steel
Duplex 1.4462 X2CrNiMoN22-5-3 S 31803 F51 A
Austenitic-Ferritic
Stainless Steel
Superduplex 1.4410 X2CrNiMoN25-7-4 S 32750 F53 A
Austenitic-Ferritic
Stainless Steel
Superduplex 1.4501 X2CrNiMoCuWn25-7-4 S 32760 F55 A
Heat resistant Steel*2 1.5415 16Mo3 S
Heat resistant Steel*2 1.7335 13CrMo4-5 F12 O
Nickel Based Alloys Alloy 400 2.4360 NiCu30Fe N 04400 A
Nickel Based Alloys Alloy C-276 2.4819 NiMo16Cr15W N 10276 A
Nickel Based Alloys Alloy 625 2.4856 NiCr22Mo9Nb N 06625 A
Titanium Titan Grade 2 3.7035 Ti-II R 50400 A


S = Standard | O = Optional | A = Alternative

*1 Brass: Body made of either CW 614N or CW 617N
*2 Blowdown Valves

Standard Features

  • Every standard Manifold or Multi-Way Cock is factory tested hydrostatically to a requirement of no visible leakage.
  • Brass, carbon steel or stainless steel valve bodies are forged. All other components are made from barstock material.
  • Certification acc. to EN 10204 2.1, 2.2, 3.1 and 3.2!
  • Manifolds for Sour Gas Service are available in accordance with NACE MR0175/ MR0103 and ISO 15156.
  • For all Manifolds and Multi-Way Cocks we are offering a range of Mounting Kits.
  • Surface treatment of carbon steel components: Phosphatized, Zinc Plated surface optional.
  • Surface treatment of carbon steel accessories: Zinc Plated.
Optional Features
  • Manifolds and Multi-Way Cocks cleaned and lubricated for Oxygen Service. Accessory Kits cleaned and degreased. Suffix used F0 and F5.
  • Manifolds for Fugitive Emission Applications.

If you don't find your options, please contact the factory.

Continuous product development may from time to time necessitate changes in the details contained in this catalogue. AS-Schneider reserves the right to make such changes at their discretion and without prior notification. All dimensions shown in this catalogue are approximate and subject to Change.
Copyright © 2015 Armaturenfabrik Franz Schneider GmbH + Co. KG. All rights reserved.