With your consent, we analyze the use of our website with tracking technologies and cookies in order to optimize the website and improve it continuously. The consent is voluntary and can be revoked at any time. Further information can be found in our privacy policy.
English
Contact
Description
Gauge Cocks Standard
  • Gauge Cocks Standard
  • Gauge Cocks Standard
  • Gauge Cocks Standard

Gauge Cocks

with Gland

AS-Schneider Gauge Cocks are basically designed, manufactured and tested according to DIN 16261, DIN 16262 and DIN 16263. According to above standards the cocks are applicable for a max. allowable (Working) Pressure (PS) of 6 – 16 bar (87 - 232 psi) and a max. allowable Temperature (TS) of 50°C (122°F) for liquids, gas or vapors. Originally the AS-Schneider Gauge Cocks were designed for a max. allowable (Working) Pressure (PS) of 25 bar (363 psi) for the G 1/2 models. We kept this pressure class for this kind of gauge cocks, see below Ordering Information.

The Gland Type is a special design and not mentioned in above DIN standards.

Operating Positions are marked on top of the plug (see also further comments under General Information).

The relevant accessories are available; please see below Mounting Bracket Kits and Accessories.

Connections, materials and further options are available, please see below Ordering Information or more detailed under:

General InformationWebshop
Gauge Cocks - With Gland

 Without Test Connection                 With Test Flange 60 x 25 x 10

Gauge Cocks Drawing (arrangement)
Ordering Information
Gauge Cocks with GlandBI
Inlet Outlet Material PN L H Hex Test Connection References Part Number
G 1/2 Female G 1/2 Female Brass 25 70 65 27   N003.09.000
With Vent N003.09.000.02
G 1/2 Male Test Flange
60 x 25 x10
N003.09.070.01
77 N003.10.000
  With Vent N003.10.000.02
MS
Further InformationAS-Schneider Gauge Cocks are basically designed, manufactured and tested according to DIN 16261, DIN 16262 and DIN 16263. According to these standards the cocks are applicable for a max. allowable (Working) Pressure (PS) of 6 – 16 bar (87 - 232 psi) and a max. allowable Temperature (TS) of 50°C (122°F) for liquids, gas or vapors. However, gauge cocks with gland are not mentioned in above DIN standards.
Copyright © 2015 Armaturenfabrik Franz Schneider GmbH + Co. KG. All rights reserved.