English
ContactFeedback
Description
Gauge Snubbers Standard 1
  • Gauge Snubbers Standard 1
  • Gauge Snubbers Standard 2
  • Gauge Snubbers Standard 3
  • Gauge Snubbers Standard 4

Gauge Snubbers

AS-Schneider Gauge Snubbers are used to improve the output or readability of the instrument, and to reduce the effect of pressure surges on the instrument.

They also limit the external discharge of the pressure medium, in the event a discontinuity should occur on the instrument side of the snubber. Closing the valve increases the dampening action.

The max. allowable (Working) Pressure (PS) is 400 bar (5,801 psi), the max. allowable Temperature (TS) is 120°C (248°F).

The relevant accessories are available; please see below Mounting Bracket Kits and Accessories.

Connections, materials and further options are available, please see below Ordering Information or more detailed under:

General InformationWebshop
Gauge Snubbers

Parallel Thread                              NPT Thread                       Type made from 32 mm square
                                                                                                         Barstock Material

Gauge Snubbers Drawing (arrangement) 1
Ordering Information
Gauge Snubbers with Parallel Threads
Inlet Outlet Material PN L WAF References Part Number
G 1/4 Male G 1/4 Female Brass 250 62,5 27 S005.10.030.01
Carbon Steel 400 61   S005.10.130.01
1.4571  400 61 NACE S005.10.230.01
G 3/8 Male G 3/8 Female  Brass 250 62,5   S005.10.020.01
1.4571   400 61  NACE S005.10.220.01
G 1/2 Male G 1/2 Female Brass 400 62,5   S005.10.000
Carbon Steel 400 61   S005.10.100
1.4571 400 61  NACE S005.10.200
M 20 x 1,5 Male M 20 x 1,5 Female Brass 400 62,5   S005.10.050
Carbon Steel 400 61  

S005.10.150 

1.4571  400 61  NACE S005.10.250
BIGauge Snubbers with NPT Threads
Inlet Outlet Material PN L WAF References Part Number
1/4 NPT Male     1/4 NPT Female    Brass 250 61    27 S005.10.031.01
1.4571 600 NACE  S005.10.231.01
1/2 NPT Male 1/2 NPT Female Brass 250 S005.10.010
Carbon Steel 400   S005.10.110
1.4571   NACE S005.10.210
316 NACE S005.10.410
Duplex 32 NACE S005.10.810.0001
Alloy 625 32 NACE S005.10.810.0009
Alloy 400 27 NACE S005.10.910.0001
Alloy C-276 32 NACE S005.10.910.0005

 

WAF = Width Across Flats I 27 = Hex, 32 = Square

MS
Mounting Bracket Kits and Accessories
Further InformationAS-Schneider Gauge Snubbers are used to improve the output or readability of the instrument, and to reduce the effect of pressure surges on the instrument. They also limit the external discharge of the pressure medium, in the event a discontinuity should occur on the instrument side of the snubber. Closing the valve increases the dampening action. The AS-Schneider Gauge Snubbers, as standard, are rated to 400 bar (5,801 psi), the max. allowable Temperature (TS) is 120°C (248°F). AS-Schneider also provides the gauge snubbers for sour gas service (acc. to NACE MR0175/MR0103 and ISO 15156), degreased and lubricated for oxygen service and DVGW approved types.
Copyright © 2015 Armaturenfabrik Franz Schneider GmbH + Co. KG. All rights reserved.