With your consent, we analyze the use of our website with tracking technologies and cookies in order to optimize the website and improve it continuously. The consent is voluntary and can be revoked at any time. Further information can be found in our privacy policy.
English
Contact
Description
Filling Connectors - SAF Type Standard
  • Filling Connectors - SAF Type Standard
  • Filling Connectors - SAF Type Standard

Filling Connectors - SAF Type

SAF Type

AS-Schneider SAF Filling Connectors are used if purge protection is required but no purge block is installed. The Filling Connector allows the system to be filled with Purge Medium through the instrument cavities. The Filling Connector has an integral Check Valve and is available with different connections. Filling Connector to Transmitter (or 2 Valve Manifold E-G Type) Mounting Kits are supplied with the filling connector as standard.


Pressure-Temperature Rating acc. to Shell MESC:

- Max. allowable (Working) Pressure (PS): 
  DIN 19213: 400 bar (5,801 psi) @ 38°C (100.4°F)
  IEC  61518: 413 bar (6,000 psi) @ 38°C (100.4°F)

- Max. allowable Temperature (TS):
  200°C (392°F)

Connections, materials and further options are available, please see below Ordering Information.

Example for a typical product acc. to the below mentioned Ordering Information:

Part No.: SAF-A00-SPS1

SAF SAF Filling Connector
-
A Seal Ring Material: PTFE
0
0
-
S Material: 1.4401 / 1.4404 / 316 / 316L
P Connections: G 1/4 Female
S Compression Fitting: Swagelok
1 Size Compression Fitting: 6 mm

 

Ordering Code
MESC Code Description Seal Ring/Packing Part Number
MESC 60.98.90.106.1 Filling Connector 6mm PTFE SAF-A00-SP*1
MESC 60.98.90.406.1 Graphite SAF-B00-SP*1
MESC 60.98.90.107.1 Filling Connector 1/4" PTFE SAF-A00-SP*7
MESC 60.98.90.407.1 Graphite SAF-B00-SP*7


* Compression Fitting - Make, type, size and composition as specified in the requisition/indent.

Ordering Information
BI
Filling Connectors - SAF Type Drawing (arrangement)
MS
Further InformationAS-Schneider SAF Filling Connectors are used if purge protection is required but no purge block is installed. The Filling Connector allows the system to be filled with Purge Medium through the instrument cavities. The Filling Connector has an integral Check Valve and is available with different connections. Filling Connector to Transmitter (or 2 Valve Manifold E-G Type) Mounting Kits are supplied with the filling connector as standard.
Copyright © 2015 Armaturenfabrik Franz Schneider GmbH + Co. KG. All rights reserved.