With your consent, we analyze the use of our website with tracking technologies and cookies in order to optimize the website and improve it continuously. The consent is voluntary and can be revoked at any time. Further information can be found in our privacy policy.
English
Contact
Description
Heatings Standard
  • Heatings Standard
  • Heatings Standard
  • Heatings Standard

Heatings

SAS & SAE Type

AS-Schneider SAS Steam Tracing Blocks & SAE Electrical Heaters are used to provide Frost Protection and to maintain Process Temperatures given that the heaters are mounted directly to the Manifold which ensures efficient Heat Transfer to the Manifold and Transmitter Body.


SAS Steam Tracing Blocks 
Steam Tracing is provided through a separate Stainless Steel Block which is mounted directly to the Manifold with one Stainless Steel M8 Mounting Bolt. The Connection to the Steam Line is provided by two G 1/4 (optional 1/4 NPT) Female Ports equipped with Tube Fittings.


SAE Electrical Heater
Conduction Heater with self-limiting output characteristic, supplied with cable length of 1m. Is directly mounted to the Manifold with one Stainless Steel M8 Mounting Bolt.

Connections, materials and further options are available, please see below Ordering Information.

Example for a typical product acc. to the below mentioned Ordering Information:

Part No.: SAS-000-SGS4

SAS SAS Steam Tracing Block
-
0
0
0
-
S Material: 1.4401 / 1.4404 / 316 / 316L
G Connections: G 1/4 Female
S Compression Fitting: Swagelok
4 Size Compression Fitting: 12 mm

 

SAS Steam Tracing Blocks
Heatings Drawing (arrangement)

Pressure-Temperature Rating acc. to Shell MESC:

Max. allowable (Working) Pressure (PS): 20 bar (290 psi) @ 210°C (410°F)            
Max. allowable Temperature (TS): 220°C (428°F)

SAE Electrical Heater
Heatings Drawing (arrangement)

Material: Aluminum (sea water resistant)                                Rating: 50 W
Size: 90 x 40 x 30 mm                                                           Ingress Protection: IP68, NEMA 4X
Voltage: 110 V to 265 V AC (50/60 Hz)                                   Type of Protection (Gas): II 2 G Ex db IIC T4
EC Examination Certificate: PTB 02 ATEX 1116 X                  Type of Protection (Dust): II 2 D Ex tb IIIC; T 135°C

Ordering Code
MESC Code Description Vent Part Number Ordering Code, Field 4 - 14
MESC 60.98.70.010.1 Steam Tracing Block 10 mm* SAS-000-SG*3 See below Ordering Information.
MESC 60.98.70.110.1 3/8"* SAS-000-SG*8
MESC 60.98.70.050.1 Electrical Heater SAE

* Compression Fitting - Make, type, size and composition as specified in the requisition/indent.
Ordering Information
BI
Heatings Drawing (arrangement)
MS
Further InformationThe SAS Steam Tracing Blocks & SAE Electrical Heaters are used to provide Frost Protection and to maintain Process Temperatures given that the heaters are mounted directly to the Manifold which ensures efficient Heat Transfer to the Manifold and Transmitter Body.
Copyright © 2015 Armaturenfabrik Franz Schneider GmbH + Co. KG. All rights reserved.