With your consent, we analyze the use of our website with tracking technologies and cookies in order to optimize the website and improve it continuously. The consent is voluntary and can be revoked at any time. Further information can be found in our privacy policy.
English
Contact
Description
Purge Block Standard
  • Purge Block Standard
  • Purge Block Standard
  • Purge Block Standard
  • Purge Block Standard

Purge Block

SVA Type

AS-Schneider is providing two different SV Purge Blocks Styles:

 

  • Single Vent Purge Blocks are designed for pressure measurement and differential pressure measurement.
  • Double Vent Purge Blocks are suitable for differential pressure applications, and are designed to connect to impulse lines on 54 mm (2 1/8”) center-to-center.


The Purge Blocks are equipped with an integral filter, a vent valve and a soft seated check valve.

A diverse range of options and the relevant accessories are available, please see below Mounting Bracket Kits and Accessories.

Connections, materials, valve head unit designs and further options are available, please see below Ordering Information or more detailed under:

General InformationExample for a typical product acc. to the below mentioned Ordering Information:

Part No.: SVA-S00-SGS3

SV SV Purge Block
A Packing: PTFE
-
S Type: Single Vent Purge Block
0
0
-
S Material: 1.4401 / 1.4404 / 316 / 316L
G Connection: G 1/4 Female
S Compression Fitting: Swagelok
3 Size Compression Fitting: 10 mm
SV Single Vent Purge Blocks
Purge Block Drawing (arrangement)
SV Double Vent Purge Blocks
Purge Block Drawing (arrangement)
Ordering Code
MESC Code Description Vent Part Number Ordering Code, Field 3 & 9 - 14
MESC 60.98.70.210.1

Single Vent Purge Block - S Type

10 mm* SVA-S00-SG*3 See below Ordering Information.
MESC 60.98.70.310.1 3/8"* SVA-S00-SG*8
MESC 60.98.70.220.1 Double Vent Purge Block - D Type 10 mm* SVA-D00-SG*3
MESC 60.98.70.320.1 3/8"* SVA-D00-SG*8

* Compression Fitting - Make, type, size and composition as specified in the requisition/indent.
Ordering Information
BI
Purge Block Drawing (arrangement)
MS
Mounting Bracket Kits and Accessories
Further InformationAS-Schneider is providing two different SV Purge Blocks Styles:
- Single Vent Purge Blocks are designed for pressure measurement and differential pressure measurement.
- Double Vent Purge Blocks are suitable for differential pressure applications, and are designed to connect to impulse lines on 54 mm (2 1/8”) center-to-center.

The Purge Blocks are equipped with an integral filter, a vent valve and a soft seated check valve. The innovative design of the valve head units gives long service life and a smooth, low-torque operation. The AS-Schneider Purge Blocks, as standard, are rated to 413 bar (6,000 psi). AS-Schneider also provides the Purge Blocks for sour gas service (acc. to NACE MR0175/MR0103 and ISO 15156), degreased and lubricated for oxygen service as well as manifolds for fugitive emission applications.
Copyright © 2015 Armaturenfabrik Franz Schneider GmbH + Co. KG. All rights reserved.