With your consent, we analyze the use of our website with tracking technologies and cookies in order to optimize the website and improve it continuously. The consent is voluntary and can be revoked at any time. Further information can be found in our privacy policy.
English
Contact
Modular Mounting System
General Features
Pressure-Temperature Rating
Standard Needle Valves
Needle Valves acc. to ISO 15848

Note: These are the General Pressure Temperature Ratings for our Instrumentation Valves and Manifolds. Due to some restrictions, some of the Modular Mounting Products are limited with regard to pressure and temperature:

Monoflanges

Pressure-Temperature Rating acc. to Shell MESC
Max. allowable (Working) Pressure (PS):
100 bar (1,450 psi) @ 38°C (100.4°F) (LPR 150 – 600 lbs)
413 bar (6,000 psi) @ 38°C (100.4°F) (HPR 900 – 2,500 lbs)

Max. allowable Temperature (TS): 200°C (392°F)



SB Manifolds

Pressure-Temperature Rating acc. to Shell MESC:
Max. allowable (Working) Pressure (PS):
DIN 19213 400 bar (5,801 psi) @ 38°C (100.4°F)
IEC 61518 413 bar (6,000 psi) @ 38°C (100.4°F)

Max. allowable Temperature (TS): 200°C (392°F)



SVA Purge Blocks

Pressure-Temperature Rating acc. to Shell MESC
Max. allowable (Working) Pressure (PS):
413 bar (6,000 psi) @ 38°C (100.4°F)


Max. allowable Temperature (TS):
• 200°C (392°F) for PTFE Packing and ISO FE Series Option

SSB Seal Pots

Pressure-Temperature Rating acc. to Shell MESC
Maximum Working Pressure:
413 bar (6,000 psi) @ 38°C (100.4°F)
Maximum Working Temperature:
450°C (842°F)


SAS Tracing Block


Pressure-Temperature Rating acc. to Shell MESC

Maximum Working Pressure:
20 bar (290 psi) @ 210°C (410°F)
Maximum Working Temperature:
220°C (428°F)



SAF Filling Connectors

Pressure-Temperature Rating acc. to Shell MESC
Maximum Working Pressure:
DIN 19213 400 bar (5,801 psi) @ 38°C (100.4°F)
IEC 61518 413 bar (6,000 psi) @ 38°C (100.4°F)
Maximum Working Temperature:
200°C (392°F)

Attention:
Packing adjustment may be required during the
Service life of the valves. Valves that have not
been cycled for a period of time may have a higher
Initial actuation torque.

Copyright © 2015 Armaturenfabrik Franz Schneider GmbH + Co. KG. All rights reserved.