With your consent, we analyze the use of our website with tracking technologies and cookies in order to optimize the website and improve it continuously. The consent is voluntary and can be revoked at any time. Further information can be found in our privacy policy.
English
Contact
Modular Mounting System
General Features
Needle Valves acc. to ISO 15848

Screwed Bonnet
– Type 1 O-Ring Stem Seal + Graphite Packing
   Type 3 PTFE Packing

Features

  • Integral Valve Seat – Metal to Metal Seated
  • Non-rotating Needle
  • External Stem Thread – Packing below stem threads. Stem Threads are protected from process media (non-wetted), helps to prevent stems from galling.
  • Stem with cold rolled threads
  • Back Seat – Metal to metal secondary needle seal
  • Color Coded Dust Cap for operating thread protection
  • Max. allowable (Working) Pressure (PS) 420 bar (6,092 psi)
  • Anti-Tamper Valve Head Options available
  • FKM O-Ring Needle Seal – RGD (Rapid Gas Decompression) resistant
  • PTFE or Graphite Packing
  • All non-wetted parts in 316 stainless steel
  • Types also comply with the requirements of TA-Luft 2002



ISO FE – Performance Data


ISO FE Type 1:
Class A 1,500 cycles / –29°C to 40°C
(–20°F to 104°F)
Class A    500 cycles / –29°C to 200°C
(–20°F to 392°F)
Class B 1,500 cycles / –29°C to 200°C
(–20°F to 392°F)

ISO FE Type 3:
Class B 1,500 cycles / –29°C to 200°C
(–20°F to 392°F)

Copyright © 2015 Armaturenfabrik Franz Schneider GmbH + Co. KG. All rights reserved.