With your consent, we analyze the use of our website with tracking technologies and cookies in order to optimize the website and improve it continuously. The consent is voluntary and can be revoked at any time. Further information can be found in our privacy policy.
English
Contact
Description
Adapters Standard
  • Adapters Standard
  • Adapters Standard
  • Adapters Standard
  • Adapters Standard
  • Adapters Standard
  • Adapters Standard
  • Adapters Standard
  • Adapters Standard
  • Adapters Standard
  • Adapters Standard

Adapters

AS-Schneider Adapters, either ΔP to Static or ΔP to ΔP Adapters, are flanged to the 5 Valve Manifolds when more than one measurement on a single set of orifice taps is required. The ΔP to Static Adapter is designed to mount both a Static Transmitter and a Differential Pressure Transmitter. The ΔP to ΔP Adapter is designed to mount 2 Differential Pressure Transmitters, - typically for custody transfer or bi-directional flow applications. The vent connection is 1/4 NPT female, the ports are plugged by default.

The ΔP to Static adapter incorporates an isolation valve for the vent connection 1/4 NPT. If transmitters with 1/2 NPT male or female connection need to be assembled to the  adapter a NPT Static Adapter (AKA-F# / AKA-M#) is available - to be ordered separately.

Bore Size: 3/8" (9.5 mm), to reduce or eliminate freezing issues.

A diverse range of options and the relevant accessories are available; please see below Mounting Bracket Kits and Accessories.

Connections, materials, valve head unit designs and further options are available, please see below Ordering Information or more detailed under:

General InformationExample for a typical product acc. to the below mentioned Ordering Information:

Part N.: AKA-SSKD-1

AKA Adapters
-
S Adapter Design: ΔP - Static Adapter
S Material: 1.4401 / 1.4404 / 316 / 316L
K Abdichtung des Betätigungsorgans: O-Ring FKM
D Seat Material: POM
-
1 Accessory Kit: In CS, Seal Ring in PTFE
ΔP to ΔP Adapters
Adapters Drawing (arrangement)
The dimensions shown in this catalogue apply to standard types. If you need the dimensions for your individual type or should you still not find your options at all please contact the factory.
ΔP Static Adapters
Adapters Drawing (arrangement)
NPT Static Adapter

NPT Static Adapter

NPT Static Adapter Part Number
Carbon Steel Stainless Steel
1/2 NPT Female AKA-FC AKA-FS
1/2 NPT Male AKA-MC AKA-MS
The dimensions shown in this catalogue apply to standard types. If you need the dimensions for your individual type or should you still not find your options at all please contact the factory.
Ordering Information
MS
Adapters Drawing (arrangement)
BI
Mounting Bracket Kits and Accessories
Further InformationAS-Schneider Adapters, either ΔP to Static or ΔP to ΔP Adapters, are flanged to the 5 Valve Manifolds when more than one measurement on a single set of orifice taps is required. The ΔP to Static Adapter is designed to mount both a Static Transmitter and a Differential Pressure Transmitter. The ΔP to ΔP Adapter is designed to mount 2 Differential Pressure Transmitters, - typically for custody transfer or bi-directional flow applications. The vent connection is 1/4 NPT female, the ports are plugged by default. The AS-Schneider Adapters, as standard, are rated to 420 bar (6,092 psi). AS-Schneider also provides the adapters for sour gas service (acc. to NACE MR0175/MR0103 and ISO 15156) and degreased and lubricated for oxygen service.
Copyright © 2015 Armaturenfabrik Franz Schneider GmbH + Co. KG. All rights reserved.