With your consent, we analyze the use of our website with tracking technologies and cookies in order to optimize the website and improve it continuously. The consent is voluntary and can be revoked at any time. Further information can be found in our privacy policy.
English
Contact
Description
Stabilized Connectors Standard
  • Stabilized Connectors Standard
  • Stabilized Connectors Standard
  • Stabilized Connectors Standard
  • Stabilized Connectors Standard
  • Stabilized Connectors Standard
  • Stabilized Connectors Standard
  • Stabilized Connectors Standard
  • Stabilized Connectors Standard

Stabilized Connectors

AS-Schneider Stabilized Connectors are close coupled to orifice meter / orifice fittings. The inlet connection (process connection), as standard, is 1/2 NPT male threaded. The Stabilized Connectors are always supplied in pairs. Depending on the application, a Stabilizer Shoe is supplied resp. recommended providing a very solid and efficient connection.

3 different types are available: ① Short Type ② Long Type and ③ Integral Valve Type.

Bore Size: 3/8" (9.5 mm) - Roddable

A diverse range of options and the relevant accessories are available; please see below Mounting Bracket Kits and Accessories.

Connections, materials, valve head unit designs and further options are available, please see below Ordering Information or more detailed under:

General InformationExample for a typical product acc. to the below mentioned Ordering Information:

Part No.: STC-VSKE-1D

STC Stabilized Connector
-
V Stabilized Connector Design: With Integral Valve
S Material: 1.4401 / 1.4404 / 316 / 316L
K Stem Seal / Packing: O-Ring FKM
E Seat Material: ETFE - 2,000 psi (138 bar)
-
1 Accessory Kit: In CS, Seal Ring in PTFE
D Option: With Dielectric Isolation Kit
Stabilized Connector - Without Integral Valve

Short Type Stabilized Connector                                 Long Type Stabilized Connector

Stabilized Connectors Drawing (arrangement)
The dimensions shown in this catalogue apply to standard types. If you need the dimensions for your individual type or should you still not find your options at all please contact the factory.
Integral Valve Type Stabilized Connector
Integral Style
Stabilized Connectors Drawing (arrangement)
The dimensions shown in this catalogue apply to standard types. If you need the dimensions for your individual type or should you still not find your options at all please contact the factory.
Ordering Information
BI
Stabilized Connectors Drawing (arrangement)
MS
Mounting Bracket Kits and Accessories
Further InformationAS-Schneider Stabilized Connectors are close coupled to orifice meter / orifice fittings. The inlet connection (process connection), as standard, is 1/2 NPT male threaded. The Stabilized Connectors are always supplied in pairs. Depending on the application, a Stabilizer Shoe is supplied resp. recommended providing a very solid and efficient connection. The innovative design of the valve head units gives long service life and a smooth, low-torque operation. The AS-Schneider Stabilized Connectors, as standard, are rated to 420 bar (6,092 psi). AS-Schneider also provides the connectors for sour gas service (acc. to NACE MR0175/MR0103 and ISO 15156) and degreased and lubricated for oxygen service.
Copyright © 2015 Armaturenfabrik Franz Schneider GmbH + Co. KG. All rights reserved.