With your consent, we analyze the use of our website with tracking technologies and cookies in order to optimize the website and improve it continuously. The consent is voluntary and can be revoked at any time. Further information can be found in our privacy policy.
English
Contact
Description
Soft Seated Gauge Valves - G Type Standard
  • Soft Seated Gauge Valves - G Type Standard
  • Soft Seated Gauge Valves - G Type Standard
  • Soft Seated Gauge Valves - G Type Standard
  • Soft Seated Gauge Valves - G Type Standard
  • Soft Seated Gauge Valves - G Type Standard
  • Soft Seated Gauge Valves - G Type Standard

Soft Seated Gauge Valves - G Type

G Type

AS-Schneider E Series Soft Seated Gauge Valves G Type are designed for mounting to Pressure Gauges, Pressure Transmitters and Pressure Switches. The standard type GS is equipped with a bleed screw. The GA Type is provided with a vent / test port, as standard 1/4 NPT Female. A pipe plug is installed in this port by default.

Bore Size: 1/4" (6.35 mm)

The valves are fully roddable due to the Cone Design Valve Seat.

A diverse range of options and the relevant accessories are available, please see below Mounting Bracket Kits and Accessories.

Connections, materials, valve head unit designs and further options are available, please see below Ordering Information or more detailed under:

General InformationExample for a typical product acc. to the below mentioned Ordering Information:

Part No.: GSMFSKD-N4N4

G Gauge Valve
S Vent Connection: Bleed Screw
M Inlet: Male Thread
F Outlet: Female Thread
S Material: 1.4401 / 1.4404 / 316 / 316L
K Stem Seal / Packing: O-Ring FKM
D Seat Material: POM
-
N4 Inlet Thread Size: 1/2 NPT
N4 Outlet Thread Size: 1/2 NPT
Soft Seated Gauge Valves

GSFF Type                                                              GSMF Type
Female x Female Threaded                                   Male x Female Threaded

Soft Seated Gauge Valves - G Type Drawing (arrangement)

GAMF Type
Male x Female Threaded

Soft Seated Gauge Valves - G Type Drawing (arrangement)
The dimensions shown in this catalogue apply to standard types. If you need the dimensions for your individual type or should you still not find your options at all please contact the factory.
Ordering Information
BI
Soft Seated Gauge Valves - G Type Drawing (arrangement)
MS
Further InformationAS-Schneider Soft Seated Gauge Valves G Type are designed for mounting to Pressure Gauges, Pressure Transmitters and Pressure Switches. The innovative design of the valve head units gives long service life and a smooth, low-torque operation. The AS-Schneider Gauge Valves, as standard, are rated to 420 bar (6,092 psi). AS-Schneider also provides the valves for sour gas service (acc. to NACE MR0175/MR0103 and ISO 15156) and degreased and lubricated for oxygen service.
Copyright © 2015 Armaturenfabrik Franz Schneider GmbH + Co. KG. All rights reserved.