Armaturenfabrik Franz Schneider
GmbH + Co. KGBahnhofplatz 12 · 74226 Nordheim · Germany
Tel. +49 7133 101-0 · Fax +49 7133 101-180
E-mail: contact@as-schneider.com · Internet: www.as-schneider.com
Go Back
Description
Condensate Pots Standard 1
  • Condensate Pots Standard 1
  • Condensate Pots Standard 2
  • Condensate Pots Standard 3

Condensate Pots

for Small Volume Displacements

Condensate Pots (also called Seal Pots) are used in the measurement of steam or other vapors for two reasons: One reason is that a level of condensed water is accumulated inside of the pot and maintains a fluid volume for displacement equal to or greater than the volume displacement of the transmitter (protecting the transmitter from heat).

The second reason for maintaining a liquid inside of the pot is to prevent flashing of the liquid in the impulse line if a sudden temperature change of the steam is made. A dam inside of the pot prevents this flashing effect.

Pots with more outlet ports for applications where foreign material should be trapped and drained preventing damage of the manifolds and transmitters are also available.

For more details please contact the factory. For details see also DIN 19211.
Condensate Pots
Condensate Pots Drawing (arrangement) 1
Optional
Condensate Pot / Primary Isolation Valve Assembly - Factory Welded
Condensate Pots Drawing (arrangement) 2
Ordering Information
Weld End Connections Part Number
Material
1.5415 1.7383
PN Volume (approx.)
Inlet Outlet 20 cm3 20 cm3
Pipe Butt Weld End Ø 21.3 x 3.2 Pipe Butt Weld End Ø 21.3 x 3.2 400 S007.51.603.42
Pipe Butt Weld End Ø 21.3 x 6.3 Pipe Butt Weld End Ø 21.3 x 6.3 500 S007.51.600.45
Pipe Butt Weld End Ø 24 x 7.1 Pipe Butt Weld End Ø 24 x 7.1 500 S007.51.600.26 S007.51.500.26
Further InformationCondensate Pots (also called Seal Pots) are used in the measurement of steam or other vapors for two reasons: One reason is that a level of condensed water is accumulated inside of the pot and maintains a fluid volume for displacement equal to or greater than the volume displacement of the transmitter (protecting the transmitter from heat).

The second reason for maintaining a liquid inside of the pot is to prevent flashing of the liquid in the impulse line if a sudden temperature change of the steam is made. A dam inside of the pot prevents this flashing effect.