Armaturenfabrik Franz Schneider
GmbH + Co. KGBahnhofplatz 12 · 74226 Nordheim · Germany
Tel. +49 7133 101-0 · Fax +49 7133 101-180
E-mail: contact@as-schneider.com · Internet: www.as-schneider.com
Go Back
Description
Soft Seated Hand Valves Standard 1
  • Soft Seated Hand Valves Standard 1
  • Soft Seated Hand Valves Standard 2
  • Soft Seated Hand Valves Standard 3
  • Soft Seated Hand Valves Standard 4
  • Soft Seated Hand Valves Standard 5

Soft Seated Hand Valves

H Type

AS-Schneider Soft Seated Hand Valves are available with a lot of options. HA Type Hand Valves are bi-directional. HX Type Hand Valves also, but the inlet is defined by the extension.

Bore Size: 1/4" (6.35 mm)

The valves are fully roddable due to the Cone Design Valve Seat.

A diverse range of options and the relevant accessories are available, please see below Mounting Bracket Kits and Accessories.

Connections, materials, valve head unit designs and further options are available, please see below Ordering Information or more detailed under:

General InformationExample for a typical product acc. to the below mentioned Ordering Information:

Part No.: HAMFSAD-N4N4

H Hand Valve
A Basic Design: Standard - 1/4" Bore Size (6.35 mm)
M Inlet: Male Thread
F Outlet: Female Thread
S Material: 1.4401 / 1.4404 / 316 / 316L
A Stem Seal / Packing: PTFE
D Seat Material: POM
-
N4 Inlet Thread Size: 1/2 NPT
N4 Outlet Thread Size: 1/2 NPT
Soft Seated Hand Valves

HAFF Type                                                                                         HAMF Type
Female x Female Threaded                                                              Male x Female Threaded

Soft Seated Hand Valves Drawing (arrangement) 1
The dimensions shown in this catalogue apply to standard types. If you need the dimensions for your individual type or should you still not find your options at all please contact the factory.
Soft Seated Hand Valves - Extended Body

HXMF Type
Extended Body Type

Soft Seated Hand Valves Drawing (arrangement) 1
The dimensions shown in this catalogue apply to standard types. If you need the dimensions for your individual type or should you still not find your options at all please contact the factory.
Ordering Information
BI
Soft Seated Hand Valves Drawing (dimension) 1
MS
Mounting Bracket Kits and Accessories
Pipe Plugs
Pipe Plugs
Female to Male Adapters
Female to Male Adapters FM Type
Further InformationAS-Schneider Soft Seated Hand Valves are available with a lot of options. The innovative design of the valve head units gives long service life and a smooth, low-torque operation. The AS-Schneider Hand Valves, as standard, are rated to 420 bar (6,092 psi). AS-Schneider also provides the valves for sour gas service (acc. to NACE MR0175/MR0103 and ISO 15156) and degreased and lubricated for oxygen service.