F Series Manifolds and Multi-Way Cocks
General Features
Connections
AS-Schneider is manufacturing a lot of different connections and connection combinations. In this catalogue we are showing the most popular types. On this page you will find the standard connections in detail.
Designations used in the tables:
Inlet = Process Connection
Outlet = Instrument / Transmitter Connection.
If you don‘t find your option please contact us.
Designations used in the tables:
Inlet = Process Connection
Outlet = Instrument / Transmitter Connection.
If you don‘t find your option please contact us.
Parallel Pipe Threads BSP Parallel Female Thread acc. to ISO 228 (e.g. G3/8)  |
Tube Fittings Single Ferrule Tube Fittings acc. to EN ISO 8434-1 Size L or S  |
 |
Weld Ends Butt Weld Ends for Pipes and Tubes acc. to EN12627 / ASME B16.9  |
Test Connection Test ConnectionM 20 x 1,5 c/w sealing cap according to DIN 16284  |
Flange Connections
Manifold to Transmitter DIN EN 61518 / IEC 61518 Type A
Manifold to Transmitter DIN EN 61518 / IEC 61518 Type A
One of the most important connections is the above mentioned flange connection. The Manifolds and Multi-Way Cocks in this catalogue are all manufactured according to DIN EN 61518 Type A.
