Description
Valves for Turbocharger Cleaning Equipment
Type S474
AS-Schneider Valves for Turbocharger Cleaning Equipment Type S474 are used to clean the turbine blades of turbochargers. Suitable for exhaust-gas turbochargers of all manufacturers. The valves are available with internal and external stem thread. The valve body is die- forged.
Nozzle Diameters: From 2.0 up to 7.5 mm, insteps of 0.5 mm
Max. allowable Temperature (TS): 1,112°F (600°C), depending on the type
Valves vor Turbocharger Cleaning Equipment Type S474
Internal Stem Thread External Stem Thread
Ordering Information
BI
MS
| Inlet | Outlet | Stem Thread |
Nozzle-Ø (mm) |
Part Number |
| Adjusting Nut G 1/2-LH | Tube Fitting O.D. 16 mm | Internal | 2.0 | S474.00.100.20 |
| 2.5 | S474.00.100.25 | |||
| 3.0 | S474.00.100.30 | |||
| 3.5 | S474.00.100.35 | |||
| 4.0 | S474.00.100.40 | |||
| 4.5 | S474.00.100.45 | |||
| 5.0 | S474.00.100.50 | |||
| Male Thread G 1/2 | 2.0 | S474.00.120.20 | ||
| 2.5 | S474.00.120.25 | |||
| 3.0 | S474.00.120.30 | |||
| 3.5 | S474.00.120.35 | |||
| 4.0 | S474.00.120.40 | |||
| 4.5 | S474.00.120.45 | |||
| 5.0 | S474.00.120.50 | |||
| External | 2.0 | S474.11.120.20 | ||
| 2.5 | S474.11.120.25 | |||
| 3.0 | S474.11.120.30 | |||
| 3.5 | S474.11.120.35 | |||
| 4.0 | S474.11.120.40 | |||
| 4.5 | S474.11.120.45 | |||
| 5.0 | S474.11.120.50 |
Further InformationAS-Schneider Valves for Turbocharger Cleaning Equipment Type S474 are used to clean the turbine blades of turbochargers. Suitable for exhaust-gas turbochargers of all manufacturers. The valves are available with internal and external stem thread. The valve body is die-forged. The robust design of the valves gives long service life and optimum operating comfort.