English
ContactFeedback
Description
Manifold-Combinations With Test Connection Standard 1
  • Manifold-Combinations With Test Connection Standard 1
  • Manifold-Combinations With Test Connection Standard 2
  • Manifold-Combinations With Test Connection Standard 3
  • Manifold-Combinations With Test Connection Standard 4
  • Manifold-Combinations With Test Connection Standard 5

Manifold-Combinations With Test Connection

AS-Schneider F Series Manifold-Combinations are designed, manufactured and tested with respect to the relevant standards applicable in this field. The manifold-combinations are for direct mounting according to DIN EN 61518 (IEC 61518). The standard inlet connections are butt weld ends and the outlet (Blowdown) connections are provided with tube fittings. The test connections are provided with M 20 x 1.5 male threads c/w sealing cap. Manifold-Combination means the welded assembly of a 3 Valve Manifold and 2 Blowdown Valves. Using a separate installation the manifold body is not heated during the Blowdown operation, therefore preventing an inadmissible heating of the Manifold / Transmitter Interface.

The manifolds are provided, as standard, with internal stem threads, the Blowdown Valves with external stem thread. The valves are operated by a removable T Handle Key.

Bore Size: 0.315 (8 mm)

The relevant accessories are available, please see below Mounting Bracket Kits and Accessories.

Connections, materials and further options are available, please see below Ordering Information or more detailed under:

General Information
Manifolds-Combinations - With Test Connection M 20 x 1.5
Manifold-Combinations With Test Connection Drawing (arrangement) 1
Ordering Information
BI
Inlet Outlet Test Connection Material Part Number
Tube Butt Weld End
Ø 14 x 2.5
IEC 61518
Type A
M 20 x 1,5
c/w Sealing Cap
1.0460 N541.87.135.51
1.4571 N541.87.235.51
MS
Further InformationAS-Schneider F Series Manifold-Combinations are designed, manufactured and tested with respect to the relevant standards applicable in this field. The manifold-combinations are for direct mounting according to DIN EN 61518 (IEC 61518). The standard inlet connections are butt weld ends and the outlet (Blowdown) connections are provided with tube fittings. The test connections are provided with M 20 x 1.5 male threads c/w sealing cap. Manifold-Combination means the welded assembly of a 3 Valve Manifold and 2 Blowdown Valves. The robust design of the manifold-combinations gives long service life and optimum operating comfort. The AS-Schneider manifold-combinations, as standard, are rated to 420 bar (6,092 psi). AS-Schneider also provides the manifold-combinations for fugitive emission applications.
Copyright © 2015 Armaturenfabrik Franz Schneider GmbH + Co. KG. All rights reserved.