Description
Stabilized Connectors
AS-Schneider Stabilized Connectors are close coupled to orifice meter / orifice fittings. The inlet connection (process connection), as standard, is 1/2 NPT male threaded. The Stabilized Connectors are always supplied in pairs. Depending on the application, a Stabilizer Shoe is supplied resp. recommended providing a very solid and efficient connection.
3 different types are available: ① Short Type ② Long Type and ③ Integral Valve Type.
Bore Size: 3/8" (9.5 mm) - Roddable
Connections, materials, valve head unit designs and further options are available, please see below Ordering Information or more detailed under:
General InformationExample for a typical product acc. to the below mentioned Ordering Information:Part No.: STC-VSKE-1D
| STC | Stabilized Connector |
| - | |
| V | Stabilized Connector Design: With Integral Valve |
| S | Material: 1.4401 / 1.4404 / 316 / 316L |
| K | Stem Seal / Packing: O-Ring FKM |
| E | Seat Material: ETFE - 2,000 psi (138 bar) |
| - | |
| 1 | Accessory Kit: In CS, Seal Ring in PTFE |
| D | Option: With Dielectric Isolation Kit |
Stabilized Connector - Without Integral Valve
Short Type Stabilized Connector Long Type Stabilized Connector
Integral Valve Type Stabilized Connector
Integral Style
The dimensions shown in this catalogue apply to standard types. If you need the dimensions for your individual type or should you still not find your options at all please contact the factory.
Mounting Bracket Kits and Accessories
Further InformationAS-Schneider Stabilized Connectors are close coupled to orifice meter / orifice fittings. The inlet connection (process connection), as standard, is 1/2 NPT male threaded. The Stabilized Connectors are always supplied in pairs. Depending on the application, a Stabilizer Shoe is supplied resp. recommended providing a very solid and efficient connection. The innovative design of the valve head units gives long service life and a smooth, low-torque operation. The AS-Schneider Stabilized Connectors, as standard, are rated to 420 bar (6,092 psi). AS-Schneider also provides the connectors for sour gas service (acc. to NACE MR0175/MR0103 and ISO 15156) and degreased and lubricated for oxygen service.