Gauge Valves

DIN 16272 Type A

AS-Schneider Block & Bleed Gauge Valves are designed for mounting to Pressure Gauges, Pressure Transmitters and Pressure Switches and are manufactured and tested according to DIN 16272. The type with 1/2 NPT connection (see below) as well as Gauge Valves with test flange are not mentioned in DIN 16272. According to DIN 16272 are the valves applicable for a max. allowable (Working) Pressure (PS) of 250 bar (3,626 psi) (brass) respectively 400 bar (5,801 psi) (carbon steel and stainless steel) and a max. allowable Temperature (TS) of 120°C (248°F) for liquids, gas or vapors.

The max. allowable Temperature (TS) of 120°C (248°F) is considering the requirement that valves and measuring instruments need to be protected against heating by hot media. This can be achieved by syphons or by instrument impulse lines with sufficient length. However the AS-Schneider valves can be used for temperatures up to 300°C (572°F) - PTFE up to 232°C (450°F), Graphite up to 300°C (572°F).

The relevant accessories are available; please see below Mounting Bracket Kits and Accessories.

Connections, materials and further options are available, please see below Ordering Information or more detailed under:

General InformationWebshop

Block & Bleed Gauge Valves - Test Connection M 20 x 1.5

Instrument Connection:

Adjusting Nut 1/2 NPT Female

Block & Bleed Gauge Valves - Test Flange

Instrument Connection: Adjusting Nut

Valve with Test Flange Ø 40 x 5 Valve with Test Flange 60 x 25 x 10

Ordering Information

Block & Bleed Gauge Valves with Adjusting Nut Instrument Connection

Inlet	Outlet	Test Connection	Material	References	Part Number
G 1/2 Male	G 1/2 Adjusting Nut	M 20 x 1,5 c/w Protective Cap	Brass	DIN 16272 Type A	S004.60.000
		M 20 x 1,5 c/w Protective Cap		DVGW approved	S004.80.000
		Test Flange Ø 40 x 5			S004.62.000
		Test Flange 60 x 25 x10			S004.61.000
		M 20 x 1,5 c/w Protective Cap	1.0460	DIN 16272 Type A	S004.60.100
		M 20 x 1,5 c/w Protective Cap		DVGW approved	S004.80.100
		Test Flange Ø 40 x 5			S004.62.100
		Test Flange 60 x 25 x10			S004.61.100
		M 20 x 1,5 c/w Protective Cap	1.4571	DIN 16272 Type A	S004.60.200
		M 20 x 1,5 c/w Protective Cap		DVGW approved	S004.80.200
		Test Flange Ø 40 x 5			S004.62.200
		Test Flange 60 x 25 x10			S004.61.200
M 20 x 1,5 Adjusting Nut	M 20 x 1,5 Adjusting Nut	M 20 x 1,5 c/w Protective Cap	Brass		S004.60.050
			1.0460		S004.60.150
			1.4571		S004.60.250

BIMSBlock & Bleed Gauge Valves with 1/2 NPT Female Instrument Connection

Inlet	Outlet	Test Connection	Material	References	Part Number
1/2 NPT Male	1/2 NPT Female	M 20 x 1.5 c/w Protective Cap	1.0460		S004.60.135.02
1/2 NPT Male	1/2 NPT Female	M 20 x 1.5 c/w Protective Cap	1.4571		S004.60.235.02

Mounting Bracket Kits and Accessories

Swivel Gauge Adapters	Sealing WashersEN 837-1
Nipple Connections	Adjusting Nuts
Adapters	Gauge Protectors
Hex NipplesHN Type	Gauge Snubbers

Further InformationAS-Schneider Block & Bleed Gauge Valves are designed for mounting to Pressure Gauges, Pressure Transmitters and Pressure Switches and are manufactured and tested according to DIN 16272. The robust design of the valves gives long service life and optimum operating comfort. The AS-Schneider Gauge Valves, as standard, are rated to 400 bar (5,801 psi). AS-Schneider also provides the gauge valves for sour gas service (acc. to NACE MR0175/MR0103 and ISO 15156), degreased and lubricated for oxygen service as well as valves for fugitive emission applications and DVGW approved types.

Facebook Linkedin Xing

Products

Company

News

Information

Print Sitemap