Description
Chart Recorder Manifolds
CR Type
AS-Schneider Chart Recorder Manifolds are designed for the calibration of chart recorders (To measure flow, static pressure and temperature) for example on natural gas pipelines. The inlet connections (process connection) as well as the vent connection, as standard, are 1/4 NPT female threaded. The test/calibration ports 1/4 NPT female are plugged. The Chart Recorder Manifolds are available as 3-valve or 5 valve manifold, see details below.
Bore Size: 1/4" (6.35 mm) - Roddable
Connections, materials, valve head unit designs and further options are available, please see below Ordering Information or more detailed under:
General InformationExample for a typical product acc. to the below mentioned Ordering Information:Part No.: CR3-SAD
| CR | Chart Recorder Manifold |
| 3 | Quantity Bonnets: 3 |
| - | |
| S | Material: 1.4401 / 1.4404 / 316 / 316L |
| A | Stem Seal / Packing: PTFE |
| D | Seat Material: POM |
Chart Recorder 3 Valve Manifolds
CR3 Type
The dimensions shown in this catalogue apply to standard types. If you need the dimensions for your individual type or should you still not find your options at all please contact the factory.
Chart Recorder 5 Valve Manifolds
CR5 Type
The dimensions shown in this catalogue apply to standard types. If you need the dimensions for your individual type or should you still not find your options at all please contact the factory.
Mounting Bracket Kits and Accessories
Further InformationAS-Schneider Chart Recorder Manifolds are designed for the calibration of chart recorders (To measure flow, static pressure and temperature) for example on natural gas pipelines. The inlet connections (process connection) as well as the vent connection, as standard, are 1/4 NPT female threaded. The test/calibration ports 1/4 NPT female are plugged. The innovative design of the valve head units gives long service life and a smooth, low-torque operation. The AS-Schneider Manifolds, as standard, are rated to 420 bar (6,092 psi). AS-Schneider also provides the manifolds for sour gas service (acc. to NACE MR0175/MR0103 and ISO 15156) and degreased and lubricated for oxygen service.