English
ContactFeedback
Go Back
Soft Seated Valves and Manifolds
General Features
Soft Seat - Cone Design
Soft Seat - Cup Design
Soft Tip Design
  • Bore Size 1/4" (6.35 mm) and 3/8" (9.5 mm)
  • Seat Material: ETFE, POM, PEEK
  • Straight-Through Design => Fully Roddable for easy cleaning if used in dirty Service
  • Bi-directional Flow
  • Field Replaceable
  • Bore Size 0.138" (3.5 mm)
  • Seat Material: PCTFE, POM, PEEK
  • Field Replaceable
  • Small in size but big on pressure load
  • Bore Size 0.197" (5 mm)
  • Tip Material: PCTFE, POM
  • Same Valve Body as for all E Series Metal Seated Valves and Manifolds
Soft Seated Hand Valves
Bore Size 0.197" (5.0 mm)
– Needle Seal: PTFE Packing or O-Ring

Features
  • Integral Valve Seat
  • Needle Seal
    – PTFE Packing or
    – O-Rings in FKM (optional RGD resistant) or EPDM
  • Soft Tip PCTFE or POM
  • Non-rotating Needle
  • External Stem Thread – Packing below stem threads.
    Stem Threads are protected from process media (non-wetted).
  • Stem with cold rolled Threads
  • Blow-out proof Needle
  • Back Seat – Metal to metal secondary needle seal
  • Lock Pin – Eliminates unauthorized removal of the bonnet
  • Color Coded Dust Cap for operating thread protection
  • Standard 6,092 psi (420 bar) rated
  • Anti-Tamper Valve Head Options available
  • All non-wetted parts in 316 stainless steel
Facebook Linkedin Xing
Products
Company
News
Information
Copyright © 2015 Armaturenfabrik Franz Schneider GmbH + Co. KG. All rights reserved.
Print Sitemap